--- | Accu-Chek Africa

Accu-Chek Active error code ---

Accu-Chek Active test strips

Error codes ---

Averages cannot be calculated.
This may be because:

you have not set the time and date,
only test results without a time and date are saved,
only test results that are not included in the calculation are saved, e.g. control results,
no test results were saved in the period in question, e.g. all test results in memory are more than 7 days old,
the chronological order of the test results in the memory has been interrupted.

Accu-Chek Active error code Battery symbol

Battery symbol

Battery symbol The battery is almost empty

Accu-Chek Active error code Blank Screen

Blank screen

Blank screen The battery is empty or you have inserted the…

Accu-Chek Active error code Lo

Lo The test result is lower than 0.6 mmol/L (10 mg/dL).

Accu-Chek Active error code Hi

Hi The test result is higher than 33.3 mmol/L (600 mg/dL).

Accu-Chek Active error code End

End The meter has been disconnected from the computer (PC).

Accu-Chek Active error code PC

PC The meter is connected to a computer (PC).

Accu-Chek Active error code ttt

ttt The ambient temperature or the meter temperature is too…

Accu-Chek Active error code EEE

EEE A meter error has occurred.

Accu-Chek Active error code E-5

E-5 The meter is exposed to too much light.

Accu-Chek Active error code E-5

E-5 The meter was exposed to a strong electromagnetic field.

Accu-Chek Active error code E-4

E-4 While the test was in progress, you connected the meter to…

Accu-Chek Active error code E-2

E-2 Your blood glucose value may be very low.

Accu-Chek Active error code E-1

E-1 You did not insert the test strip into the meter correctly…