FAQs

<p>It’s important to keep the lancing device clean and disinfected, as it may come into contact with blood during normal testing.</p><p><strong>Cleaning and disinfecting tips to ensure proper care without damaging your device:</strong></p><ol><li>Remove the lancet before cleaning and disinfecting.</li><li>Clean and disinfect the lancing device once a week, or when it has visible signs of dirt or other material.</li><li>Clean and disinfect the lancing device before allowing anyone else to handle it, for instance if you have someone assisting you. Do not allow anyone else to use your lancing device to obtain their blood sample.</li><li>Use mild dishwashing liquid mixed with water to clean your device and 70% isopropyl alcohol to disinfect it.</li><li>Let it air dry. </li><li>You might notice a slight discoloration of the lancing device after multiple cleanings. This does not affect its functionality.</li></ol><p><strong>How to clean and disinfect the entire lancing device surface and cap:</strong></p><ol><li>Wash your hands thoroughly with soap and water.</li><li>Wipe the entire lancing device surface. Make sure that no liquid enters any opening, as it could damage the device.</li><li>Remove and wipe the inside of the cap.</li><li>Dry the lancing device and cap with a soft cloth or gauze. Make sure that no solution is seen in any opening.</li><li>Repeat these steps with 70% isopropyl alcohol to fully disinfect the lancing device.</li><li>Wash your hands thoroughly with soap and water.</li></ol>

<p>We recommend that the drums are stored in their original packaging. Keep your drums clean and protect them from extremes of temperature.</p>

<p>The most comfortable setting of your Accu-Chek FastClix lancing device will depend on a few things:</p><ul><li>Your skin – softer, thinner skin requires a shallower setting than thicker skin.</li><li>The required blood sample – the more blood you require, the higher the setting you'll need.</li><li>The optimal penetration depth is a combination of both. Start with a low setting when using the device for the first time. Adjust to a higher setting until the blood volume is correct.</li></ul>