USB | Accu-Chek Africa

Accu-Chek Instant

Error codes USB

The meter is connected to a PC and a blood glucose or control test cannot be performed.
EITHER remove the USB cable and perform a blood glucose or control test OR remove the test strip and start a data transfer.

Blood glucose may be lower than the measuring range of the…

Blood glucose may be higher than the measuring range of the…

Err

The meter was unable to pair with a mobile device.

Battery

The batteries are almost out of power..

Blank

The meter will not turn on or the display is blank.

E-13

Fluid or foreign material may be present in the test strip…

E-14

An electronic error has occurred.

E-12

Your blood sample may contain a high level of ascorbate.

E-11

The test strip may be damaged.

E-10

The time and date setting may be incorrect.

E-9

The batteries may be out of power.

E-8

The temperature is above or below the proper range for the…

E-7

An electronic error occurred.

E-4

Not enough blood or control solution was drawn into the test…

E-6

Blood or control solution was applied to the test strip before…

E-3

A meter or test strip error has occurred.

E-1

The test strip may be damaged, not properly inserted, or was…

Accu-Chek Instant

Error codes USB

Product Support